On the sensitivity of ultrasonic welding of epoxy- to polyetheretherketone (PEEK)-based composites to the heating time during the welding process

Abstract

This study aims at assessing the sensitivity of the ultrasonic welding process for joining epoxy- to thermoplastic-based composites sensitivity to the heating time. For that, carbon fibre (CF)/epoxy adherends with a co-cured PEI coupling layer were ultrasonically welded to CF/polyetheretherketone (PEEK) adherends at different heating times. Process-induced changes in the meso and microstructure of these welds were identified and correlated to the weld strength. Subsequently, a processing interval, i.e., a range of heating times resulting in less than 10% decrease of weld strength, was defined. As, expected, the dissimilar composite welded joints were more sensitive to the heating time than the CF/PEEK to CF/PEEK welded joints. However, this effect was less pronounced than expected, since a relatively wide processing interval could be obtained provided that the coupling layer had a sufficient thickness.

Sofia Teixeira de Freitas

Principal Investigator

Sofia Teixeira de Freitas researches the structural integrity of bonded and layered materials to enable durable, sustainable structures. She is also an accredited group facilitator, committed to building academic environments grounded in cooperation and inclusion—key to overcoming technological limits and addressing the challenges of a truly sustainable society.