Meet the Team
Principal Investigator
Postdoc Researcher
PhD Candidate
PhD Candidate (co-supervised with ISAE-Supaero)
PhD Candidate (co-supervised with CESI-France)
Master Student
BSc Student
Collaborator
Alumni Postdoc
- Charline van Innis , Fracture characterization of metal-tothermoplastic interfaces, Aerospace Engineering, TU Delft, 2024-2025
- Mohamed Saleh , Fracture mechanisms of bi-material bonded joints with thick bondlines under maritime environmental conditions, Aerospace Engineering, TU Delft, 2018-2021
- Wandong Wang , Fatigue and durability of Titanium skinsto-CFRP-stiffeners bonded joints for application in aircraft leading edges,Aerospace Engineering, TU Delft, 2017-2018
Alumni PhD
- Mostafa Moazzami , Cyclic aging of bi-material adhesively bonded joints, Iran University of Science and Technology, Iran
- Xi Li , Unfolding the early fatigue damage accumulation for cross ply laminates, Aerospace Engineering, TU Delft, October 2022
- Márcio Arouche , Fracture mechanics of bi-material bonded joints: mixed mode under maritime conditions, CEFET, Brazil, July 2021
- Romina Lopes Fernandes , Understanding of crack growth in bi-material bonded joints with thick bondlines, Aerospace Engineering, TU Delft, July 2021
- Eirini Tsiangou , Thermoset-to-thermoplastic Ultrasonic Welding, Aerospace Engineering, TU Delft, April 2021
- Julian Kupski , Novel adherend laminate designs for composite bonded joints, Aerospace Engineering, TU Delft, November 2020
Alumni MSc
- Luis Pereira, 3D printed microstructures for reinforcing biobased resins, Aerospace Engineering, Instituto Superior Tecnico, Portugal, 2025
- Nkosinathi Peter, 3D printed meta materials for sandwich cores of biobased materials, Aerospace Engineering, Instituto Superior Tecnico, Portugal, 2024
- Martino Giobbio, Repair Methods for CFRP Aircraft Structures with Functional inserts, Aerospace Engineering, TU Delft-Airbus, 2023
- Atharva Joshi, Effect of Composite Layup on The Mechanical Behaviou of Adhesively Bonded T-joints, Aerospace Engineering, TU Delft, 2022
- Michal Skarka, Development of a quasi-static simulation methodology for a damage tolerance assessment of impact damage in bonded CFRP structures, Aerospace Engineering, TU Delft-Airbus, Cum laude, 2022
- Francisca Ferreira, Bonded repair optimization for composite structures, Aerospace Engineering, TU Delft-Universidade da Beira Interior, Cum laude, 2021
- Teodor Gheorghe, Sub-component design of composite bonded joints for maritime applications, Civil Engineering, TU Delft–TNO, 2020
- Koen Gribnau, Fiber Reinforced Polymers for reinforcement of steel bridges, Civil Engineering, TU Delft–IV Infra, 2020
- Joao Freitas, Composite laminate effect on the damage progression of composite single lap bonded joints, Aerospace Engineering, TU Delft, 2019
- Joost de Jong, Bonded FRP-steel deck-to-girder connections: renovation of movable bridges, Civil Engineering, TU Delft–Iv Infra, 2018
- Chantal de Zeeuw, The behaviour of steel bonded joints under hygrothermal and creep loadings, Aerospace Engineering, TU Delft–BAM Germany, Cum laude, 2018
- Cristina Mestre Rodriguez, The thickness effect in adhesive bonded joints, Civil Engineering, TU Delft–TNO, 2018
- Xavier Deville, Induction heating with carbon nanotube fibres, Aerospace Engineering, TU Delft–EPFL Switzerland, 2017
- Miriam Gomez Garcia, Adhesion performance on carbon fibre reinforced poly-phenylene sulphide depending on surface treatments, Aerospace Engineering, TU Delft–Airbus Germany, 2017
- Luis Eduardo Espinosa Chavez, Design of an Experimental Test Set-up for Buckling of a Trailing Edge Composite Bonded Joint Specimen Based on Semi-analytical and Numerical Models, European Wind Energy Master (EWEM), TU Delft-DTU Denmark, 2017
- Anna Ioannidou-Kati, Mechanical behaviour of transparent structural silicone adhesive laminated connections under monotonic and cyclic loading, Civil Engineering, TU Delft, Cum laude, 2017
- Sebastien Lachance-Barrett, Investigation of Trailing Edge Sub-Components in Wind Turbine Blades, European Wind Energy Master (EWEM), TU Delft–DTU Denmark, 2016
- John Haverkamp, Simulation of the thermoplastic automated tape laying/fibre placement process, Aerospace Engineering, TU Delft, 2016
- Christophe Severijns, On the Assessment of Induction-Heated Adhesive Bonding: An Experimental Investigation of its Abilities as a Green, Next-Generation Manufacturing Technique for the Aerospace Industry, Aerospace Engineering, TU Delft, 2016
Alumni BSc
- HO XUAN Ngoc Chau, TU Delft–ENSMA, France, 2023
- Arthur Breau, TU Delft–ESTA Bretagne, France, 2022
- Nicolas Roux, TU Delft–ENSMA, France, 2021
- Gabin Charpentier, TU Delft–ENSMA, France, 2019
- Armand Gibert, TU Delft–ENSMA, France, 2019
- Jiri Dolinsky, TU Delft–Brno University of Technology, Check Republic, 2018
- Florence Badan, TU Delft–ESIR, France, 2017
- Guilherme Telles, TU Delft–UFSCAR, Brazil, 2016
- Isabela Vieira, TU Delft–UFF, Brazil, 2016
